With the advent of peel and stick wallpaper, decorating your walls has never been easier. However, to get the best results it is important to follow a few simple steps.
Start by lining up your first strip of wallpaper using a level or straight edge as a guideline. This will ensure that the pattern matches at the top.
Preparation
Peel and stick wallpapers apply to many wall surfaces including painted walls, smooth drywall, wood paneling, furniture, cabinetry and more. They stay in place for as long as you wish without the mess of glues or pastes and are easy to remove cleanly when it is time for a change.
One important thing to note is that the surface must be thoroughly cleaned and properly prepared prior to wallpapering, particularly if it has recently been painted or repainted. You want to ensure that the paint is fully cured and that it is smooth. For more info I’ll suggest you visit the website wallpaper singapore.
Start by identifying the most prominent corner of the room (or the first wall you will be working on). Use a level to create a plumb (perfectly vertical) line that will serve as your guide. You need this to be accurate because if the first strip of wallpaper isn’t straight, every subsequent strip will inevitably become crooked as well. When you’re ready to begin, trim away a wedge of the corner wallpaper so that it is precisely along your marked line.
Cutting
Peel and stick wallpaper is available in a variety of colors, patterns, and textures. You can use it to transform a room, add character, or even hide unsightly marks on a wall.
Before you start hanging your peel and stick wallpaper, make sure to clean the surface and prepare the work area. Turn off and remove electrical outlets, move furniture out of the way, and clean any dust from the walls with a damp rag.
Then, measure your wall and purchase enough wallpaper to cover the space plus a little extra for mistakes. You can find wallpaper calculators online that will help you estimate the number of rolls needed. Next, trim your wallpaper at the ceiling and along baseboards. You can also trim it around obstructions such as doors, windows, and light switches. Use a utility knife to get clean, precise cuts without edge walking. This step is important because it will set the pattern or design straight on your wall.
Applying
While applying peel and stick wallpaper is much faster and easier than traditional wallpaper, the process does require some patience. This is especially true when working with a corner or a difficult area of your wall.
Start your wallpaper project by creating a guide line with the first strip. This will ensure that every other strip of wallpaper is lined up properly. Using a level and straight edge will help make this task even more simple.
After you’ve created a guide line, it’s time to begin applying the wallpaper. Begin by removing the backing and adhering the wallpaper to the wall, making sure it is straight and smooth.
Continue to apply the wallpaper until your entire wall is covered, taking care to cut and trim as needed around obstructions such as light fixtures, faceplates and electrical outlets. Tempaper’s peel and stick wallpaper will remain on your walls without damaging the surface for as long as you wish, making it an ideal choice for renters or anyone looking to redecorate their space on a budget.
Removing
One of the many advantages of peel and stick wallpaper is that it can be removed without any damage to your walls. To do this, start by locating a corner or seam and gently lifting it. If the paper becomes stuck, apply a little heat from your hairdryer to loosen it.
Once the wallpaper is up, you can use a brush or squeegee to smooth it onto the wall and eliminate any air bubbles or wrinkles. If you need to work around baseboards or crown moulding, you can also use a utility knife to cut the paper to fit the corners.
Now that your first strip of wallpaper is down, you can use a level and straight edge to line up your guideline with the ceiling. This will ensure that the next strip is tightly lined up with the previous strip for a seamless seam. You may need to repeat this process for each new strip you hang, but it will save you time in the long run.
